![]() ![]() System - this will be any physically connected outputs to. There are five different Output types that you can enable in the software. That is, it is a property of a Screen that tells the rendered image where to go. (NOTE: if you are only using SDI or NDI for your audio output, you should choose "None" for you "Main" output and enable the SDI & NDI option. An Output is a connection between a Screen and a physical device (or digital equivalent) that ProPresenter will be displayed on. Finally, the multi-streaming services recommended will cost either 40 a month or a 140 a month, depending on the provider. If a church is using an analog console, an audio interface will cost 100. Now what syphon does is it, um, sends the output of ProPresenter into any. Most churches already use ProPresenter and a digital mixing console. More information on this output type is available in our article here. In ProPresenter 7, you can sync two or more computers over a local network. If you are outputting your main audio output via either NDI or SDI, you should enable the SDI & NDI option. ![]() ![]() More information on Audio Routing can be found here. You can route ProPresenter's audio channels to the channels of your output device here as well. You have the option to set a volume level for the main output of the program, as well as the ability to delay the audio up to 1500 ms. This will work great when using nature videos or time-lapses. Typically, this will be the System Setting unless you are using a more specialized setup for your audio output. You can also choose individual Routing for the Inspector output and an overall volume level.įor the Main Output, you can also choose an output device. This is useful, for example, if you want to use headphones plugged in to the computer to check the audio of a media file without impacting the audio going out the main output. There are different audio output options for the Media Inspector, the Main output, and for SDI and NDI outputs.įor the Inspector Output, you can choose a device to preview the audio of media shown in the media inspector. ProPresenter operators control presentations on one screen, while dynamically presenting to an audience on one or more additional screens. How to make a multiview in ProPresenter 7 Today, let’s look at creating a multivew in Pro7. If you are using multi-channel audio input devices or want more flexibility in how you process your audio, you can choose more channels. This number is set to 2 by default for a typical stereo (Left and Right) channel output. Here, you first select the number of channels you wish for ProPresenter to process (both for inputs and outputs). You can select what audio device/setup works best for you in the Audio tab of ProPresenter Preferences. Just as there are different options for setting up multiple screens for video in ProPresenter, there are also options in place for setting up your Audio Outputs. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |